top of page
IMG_E3550.JPG

Bringing Powder Coating In-House vs. Outsourcing: The Definitive ROI and Logistics Guide for Growing Fabricators

Jun 30, 2022
3 min read

Updated: Oct 20

July 1, 2022 - For expanding original equipment manufacturers (OEMs) and structural metal fabricators, relying on a local job shop for powder coating is a standard operational phase. It avoids early capital expenditures and allows you to focus purely on cutting, welding, and forming. However, as your monthly production volumes grow, outsourcing your finishing eventually shifts from a convenient service to a severe liability.


If your facility is currently struggling with volatile vendor lead times, unpredictable quality control, unceasing transit damage, or high third-party finishing invoices, it’s time to look at the hard data. Bringing your powder coating process in-house is one of the most powerful ways to secure your supply chain, expand your profit margins, and gain total control over your delivery dates. Below, we dive into the technical indicators, financial metrics, and equipment configurations that dictate when it's time to make the switch.


Recognizing the Hidden Costs of Outsourcing

Many business owners look only at the line-item cost on a job-shop invoice when evaluating finishing expenses. In reality, outsourcing introduces massive hidden costs that drain your plant's profitability:


  1. Logistical Dead Weight: Think about the labor required to pack welded fabrications onto pallets, wrap them, load them onto a flatbed, haul them to a vendor, and haul them back. This double-handling damages parts and burns costly man-hours.

  2. The Lead-Time Bottleneck: When your finishing is outsourced, you lose control of your shipping schedule. If your vendor's line breaks down or they prioritize a larger client, your finished assemblies sit in limbo, delaying billing cycles and damaging your customer relationships.

  3. Pre-Treatment Blind Spots: You cannot easily verify what happens inside a third-party wash bay. If a vendor cuts corners on their chemical concentrations or skips a crucial rinse stage, the powder will eventually fail in the field—and your brand's reputation takes the hit.


Analyzing the ROI Threshold

When does the capital investment of an in-house line make financial sense? While a complete financial analysis depends on part geometry and chemical choices, a general rule of thumb applies: If your outsourced powder coating costs exceed $8,000 to $10,000 per month, an in-house system can generate a positive return on investment inside of 18 to 24 months.


By moving the process in-house, you immediately capture the job shop's built-in profit margin (typically 30% to 50%). Furthermore, you eliminate the freight costs of shipping raw and finished goods back and forth. More importantly, reducing your overall manufacturing cycle time from weeks to hours unlocks significant cash flow by allowing you to invoice your clients the same day a part is fabricate


Tailoring System Scales: Batch vs. Automated Lines

System Property

Industrial Batch System

Automated Conveyorized Line

Production Style

Intermittent, high-mix, or low-volume

Continuous, high-volume, uniform parts

Ideal Part Geometries

Large, heavy structural frames, multi-size

Stamped components, enclosures, repeating

Material Handling

Manual rolling carts or overhead rails

Continuous overhead monorail track

Pre-Treatment Style

Manual wand wash bay or automated batch

Inline multi-stage spray washer tunnels


  • Deimco Custom Batch Systems: Perfect for facilities that handle highly customized, low-to-medium volume, or exceptionally large and heavy parts (like industrial chassis or large weldments). A batch setup consists of a manual wash bay (often utilizing an automated multi-stage pressure wand system), a walk-in powder application booth, and a high-efficiency Industrial Batch Oven. Parts are rolled in on heavy-duty carts, coated, and baked. This system offers incredible versatility for high-mix shops with minimal capital entry costs.

  • Deimco Automated Conveyor Lines: Engineered for high-output manufacturing operations where parts move continuously. An automated overhead track carries parts seamlessly through an inline multi-stage spray washer tunnel, a dry-off oven, automated or manual powder spray booths with reclaim filtration, and finally through a continuous cure oven. This layout maximizes throughput while dropping your per-part labor cost to the absolute minimum.


Step Into Complete Manufacturing Independence

Stop letting external vendors dictate your delivery schedules and profit margins. Bringing your finishing in-house with Deimco means getting a single-source, American-made system—complete with pre-wired UL-listed control panels, and fully integrated safety interlocks designed strictly to NFPA 86 standards.


Ready to see how the math stacks up for your facility? Connect with a Deimco engineer today to request a custom ROI evaluation and equipment quote.



Comments


Commenting on this post isn't available anymore. Contact the site owner for more info.
bottom of page